Skip to content
Review

Audio-Technica AT-LP60X Review (2026): Easy Auto Turntable

Audio-Technica AT-LP60X
8.2
Excellent
Avg. of 4 expert reviews
Check price on Amazon

A fully automatic belt-drive turntable with a built-in phono preamp, aimed at people who want to play records without learning to set up a deck. Here is what it does well and where it stops.

Research Desk
Editor-approved · Updated November 16, 2026

Research-based · We earn from qualifying purchases

Our verdict

The AT-LP60X is a simple, plug-and-play turntable that suits newcomers wanting good sound without fuss. Skip it if you want to tweak or upgrade the setup, or if you want wireless playback or the detail of pricier decks.

The good

  • Fully automatic cueing and return make it easy for beginners
  • Built-in switchable phono preamp works with powered speakers or any stereo
  • Balanced, natural sound for the price, per reviewers
+2 more
  • Plays both 33-1/3 and 45 RPM records
  • Replaceable ATN3600LC stylus; compact, clean design

The bad

  • Light, plastic-feeling chassis
  • Fixed cartridge with no tracking-force or anti-skate adjustment limits upgrades
  • Less fine detail than pricier turntables
+1 more
  • No Bluetooth or built-in speakers

This Audio-Technica AT-LP60X review looks at a turntable built around one idea: getting a record spinning with as little fuss as possible. It is a belt-drive deck with fully automatic operation, a built-in phono preamp and a pre-fitted cartridge, so there is very little to assemble or calibrate. It is aimed at people who have a few records, or a growing pile, and want to hear them without learning the finer points of turntable setup.

Audio-Technica AT-LP60X: specs at a glance

From the manufacturer
Type
Belt drive, fully automatic
Motor
DC servo-controlled
Speeds
33-1/3 RPM, 45 RPM
Weight
2.6 kg (5.73 lbs)
Platter
Aluminum
AC Adapter
12 V, 2 A
Wow and Flutter
Less than 0.25% (WTD) @ 3 kHz
Phono Pre-Amp Gain
36 dB nominal, RIAA equalized
Replacement Stylus
ATN3600LC
Output Level (LINE)
150 mV nominal at 1 kHz, 5 cm/sec
Output Level (PHONO)
2.5 mV nominal at 1 kHz, 5 cm/sec
Signal-to-Noise Ratio
>50 dB (DIN-B)
Dimensions (W x H x D)
359.5 mm (14.15") x 97.5 mm (3.84") x 373.3 mm (14.70")
Power Supply Requirements
100 to 240 V, 50/60 Hz, 0.6 A Max.

Key features

  • Fully automatic operation: the tonearm cues and returns on its own, so no setup skills are needed
  • Built-in switchable phono preamp connects straight to powered speakers or a stereo without a phono input
  • Plays 33-1/3 and 45 RPM records
  • Die-cast aluminum platter is designed to reduce resonance
  • Redesigned tonearm base and headshell for better tracking and less resonance
  • Integral Dual Magnet cartridge with a replaceable diamond stylus (ATN3600LC)
  • External AC adapter keeps AC/DC conversion out of the chassis to reduce noise
  • Includes detachable RCA cable, 45 RPM adapter and removable hinged dust cover

Three independent expert guides recommend it, and its published review scores are solid rather than spectacular. That fits the pitch: a simple, approachable deck, not an enthusiast's project.

Design and build

The AT-LP60X is a compact, fairly plain turntable. It measures 359.5 mm wide, 97.5 mm high and 373.3 mm deep, so it fits on a shelf or sideboard without taking over the room. It weighs 2.6 kg (5.73 lbs), and a common criticism from reviewers is a light, plastic-feeling chassis.

A common criticism is that the chassis feels light and plastic. That is a fair trade-off for a deck at this level, but it is worth knowing if you are used to the heft of heavier players. The platter is die-cast aluminum, designed to reduce resonance, and Audio-Technica says it redesigned the tonearm base and headshell for better tracking and less resonance. Reviewers describe the overall look as clean, which suits a deck meant to sit unobtrusively in a living room.

The package includes a removable hinged dust cover, a detachable RCA cable and a 45 RPM adapter. The detachable cable is a practical touch, since it can be swapped if it is ever damaged or you want a different length.

Power comes from an external AC adapter (12 V, 2 A). Keeping the AC/DC conversion outside the chassis is intended to reduce noise, which is a sensible design choice on a turntable where a hum would be audible.

Features and what they mean day to day

Fully automatic operation

The headline feature is that the tonearm cues and returns on its own. Audio-Technica says no setup skills are needed, and reviewers consistently list the automatic cueing and return as a reason it works well for beginners.

In practice this removes the part of vinyl that makes new users nervous: placing a stylus on a spinning record by hand.

Built-in switchable phono preamp

Turntables put out a very small signal that needs a phono preamp to bring it up to a level ordinary audio gear can use. Many stereos have a phono input for this, but many modern systems and powered speakers do not. The AT-LP60X has a built-in, switchable phono preamp, so you can connect it straight to powered speakers or a stereo without a phono input.

The switchable part matters. The deck lists a line-level output of 150 mV nominal at 1 kHz, 5 cm/sec and a phono-level output of 2.5 mV nominal at 1 kHz, 5 cm/sec. The built-in stage has a nominal gain of 36 dB and is RIAA equalized. In short, the built-in preamp lets the deck work with a simple speaker setup or a stereo without a phono input.

33-1/3 and 45 RPM playback

The deck plays 33-1/3 and 45 RPM records, covering standard albums and 45 RPM singles. The included 45 RPM adapter handles the larger centre holes on singles. The spec sheet lists no 78 RPM option, so that is not something this deck is designed for.

The cartridge and stylus

The AT-LP60X uses an Integral Dual Magnet cartridge with a replaceable diamond stylus, the ATN3600LC. A worn stylus can be replaced without replacing the whole turntable, which is worth bearing in mind as the deck ages.

The flip side is the main limitation reviewers raise: the cartridge is fixed, and there is no tracking-force or anti-skate adjustment. That keeps setup simple, but it limits how far you can upgrade the deck. If you enjoy tinkering with cartridges, this is not the platform for it.

Performance and sound

Audio-Technica gives a wow and flutter figure of less than 0.25% (WTD) @ 3 kHz, and the motor is DC servo-controlled, which is aimed at keeping playback speed steady. The signal-to-noise ratio is listed as greater than 50 dB (DIN-B). These are the manufacturer's numbers, and the more telling information is how independent reviewers describe the sound.

They generally describe it as balanced and natural for the price. That is a measured way to put it. Reviewers do not present it as a high-resolution deck: a common criticism is that it gives up some fine detail compared with pricier turntables. For a first deck feeding a pair of powered speakers, that is a reasonable place to land. If you already own a high-end system and are chasing every last detail, the limits will be more obvious.

Because the deck is light and the cartridge cannot be adjusted, the sound you get is largely the sound you get. That is a feature for those who want to plug in and listen, and a restriction for those who want to improve the setup over time.

Connectivity

Connectivity is wired and simple. The detachable RCA cable carries the signal to powered speakers, an amplifier or a receiver. There is no Bluetooth and there are no built-in speakers, so you need something to play through. If your speakers are wireless-only, or you want to stream the deck to headphones or a Bluetooth speaker, this model does not do that.

The deck's power supply requirements are listed as 100 to 240 V, 50/60 Hz, 0.6 A max.

What experts like and what they criticise

The AT-LP60X averages 8.3/10 across 3 expert reviews. Aphrodite Sound scores it 4.5/5, Crackling Sound gives it 7.8/10 and VinylPickup rates it 8.1/10. Those are good scores for a simple, low-fuss deck, and they come with a consistent set of reasons.

What reviewers praise:

  • The fully automatic cueing and return, which they highlight as ideal for beginners.
  • The built-in switchable preamp that works with powered speakers or a stereo.
  • Balanced, natural sound for the price.
  • Support for both 33-1/3 and 45 RPM records.
  • The replaceable ATN3600LC stylus, plus a compact, clean design.

What they criticise:

  • A light, plastic-feeling chassis.
  • A fixed cartridge with no tracking-force or anti-skate adjustment, which limits upgrades.
  • Less fine detail than pricier turntables.
  • No Bluetooth or built-in speakers.

None of these is a surprise. The praise is about convenience and the criticism is about ceilings, which is how you would expect a plug-and-play turntable to be judged.

Who should buy it and who should skip it

Buy it if you are new to vinyl and want a turntable that works without setup. It is a good fit if you plan to connect it to powered speakers, or to a stereo that has no phono input, since the built-in preamp covers that. It also suits anyone who values a compact footprint and a clean look, and who likes the idea of a replaceable stylus rather than a throwaway player.

Skip it if you want to adjust tracking force or anti-skate, swap the cartridge or grow the deck into a more serious system. Skip it too if you want wireless playback, since there is no Bluetooth, or if you expect the detail of pricier turntables. The light, plastic-feeling chassis is another reason to look elsewhere if build quality is high on your list.

How it fits in its category

Turntables broadly split into two camps: simple, automatic decks that prioritise ease of use, and manual decks with adjustable tonearms and upgradeable cartridges that reward tinkering. The AT-LP60X belongs firmly in the first camp. Its appeal is that everything is handled for you, from cueing to the phono stage. Its limits come from the same choices: with little to adjust, there is little to improve.

Audio-Technica AT-LP60X review: final verdict

The AT-LP60X does what it sets out to do. It is easy to use, flexible about what it connects to and well regarded by independent reviewers, with an average of 8.3/10 across 3 expert reviews. Its weaknesses are the light build, the fixed cartridge and the lack of wireless features, all of which are consistent with its simple approach. If you want to start playing records without a learning curve, it is a sensible choice. If you already know you want to tweak, upgrade or stream, look at more adjustable decks instead.

Not sure about the Audio-Technica AT-LP60X? Consider these

Shopping around?Best Record Players / Turntables 2026: Starter to Hi-FiCompare the best →

Frequently asked questions

Is the Audio-Technica AT-LP60X worth it?

For beginners who want an easy, plug-and-play turntable, reviewers think so. It averages 8.3/10 across 3 expert reviews and is recommended in 3 expert guides. It is less suited to people who want to tweak or upgrade the setup, or who want the detail of pricier decks.

Does the AT-LP60X have a built-in phono preamp?

Yes. It has a built-in switchable phono preamp, so it can connect straight to powered speakers or a stereo with no phono input. The preamp is switchable.

Is the AT-LP60X fully automatic?

Yes. The tonearm cues and returns on its own, so you do not have to place the stylus on the record by hand.

Does the AT-LP60X have Bluetooth or built-in speakers?

No. It is a wired turntable with no Bluetooth and no built-in speakers, so you need powered speakers or a stereo to listen through.

Can I upgrade the cartridge on the AT-LP60X?

Not really. The cartridge is fixed and there is no tracking-force or anti-skate adjustment, which limits upgrades. You can replace the worn stylus with the ATN3600LC.

What record speeds does the AT-LP60X play?

It plays 33-1/3 and 45 RPM records, and a 45 RPM adapter is included.

Sources

Specs are taken from the manufacturers' official pages; expert recommendations from the publications below.

  • Audio-Technica AT-LP60X: audio-technica.com, docs.audio-technica.com

Related reviews & guides