Bluetti Elite 30 V2 vs Anker SOLIX C1000 Gen 2 (2026)

BLUETTI Elite 30 V2 vs Anker SOLIX C1000 Gen 2 is really a choice between portability and power. Most buyers who want a quiet, carry-anywhere backup for laptops, phones and a desk setup should pick the Elite 30 V2. If you need to run appliances or tools at home or at camp, the C1000 Gen 2 is the better choice, because its capacity and output are on a different level.

Both are mid-range LiFePO4 power stations with a 5 years warranty, a built-in UPS function and app control. Neither can be expanded with extra batteries. Past that, they are built for different jobs, and the facts separate them clearly.

BLUETTI Elite 30 V2 vs Anker SOLIX C1000 Gen 2: capacity and output

This is the biggest difference. The Elite 30 V2 has a 288Wh battery and a 600W rated output, with 1500W Power Lifting for short bursts from higher-draw devices. The C1000 Gen 2 has a 1,024Wh battery, 2,000W continuous AC output and 3,000W surge.

In practice, the Elite 30 V2 suits light loads such as laptops, phones, routers and small electronics. Reviewers note that its small capacity limits runtime and heavy loads, and that is the main compromise. The Power Lifting feature helps with short spikes, but it does not turn a 288Wh unit into an appliance station.

The C1000 Gen 2 has far more room. Reviewers praise its capacity for supporting much longer runtimes than a small unit, and its output for handling bigger appliances. If your goal is home backup, camping with larger gear, or powering tools, this is the one that fits.

Edge: C1000 Gen 2 for anyone running more than light electronics. Elite 30 V2 only if your loads stay small.

Portability and noise

Here the Elite 30 V2 pulls ahead. It weighs 4.3kg (9.48 lbs) and measures 250 × 178 × 167.5 mm (9.8 × 7 × 6.6 in). Reviewers call it easy to carry and store. BLUETTI lists about 30dB quiet running and 4.5W standby with its UltraCell tech, and reviewers praise the quiet operation.

Anker describes the C1000 Gen 2 as a compact, light design at 24.9 lb / 11.3 kg and 384 × 208 × 244 mm (15.12 × 8.19 × 9.61″). It is still a heavy unit to move around, and reviewers list the weight as a drawback next to small units. They also say its fans are loud when charging fast or under heavy load. Anker does not list a noise figure.

Neither unit has a built-in light, according to reviewers. The Elite 30 V2 also lacks a wireless charging pad. One more Elite caveat: a reviewer measured high idle drain with AC on unless Eco mode is used, so you should switch that mode on for a desk setup that sits idle for long periods.

Edge: Elite 30 V2 for carrying, travel and quiet rooms.

Charging speed and solar

Both recharge quickly, but they are not recharging the same amount of energy. The Elite 30 V2 uses TurboBoost to reach 80% in 45 mins on AC, and BLUETTI lists a full charge in 70 mins at a max of 380W. Its solar input tops out at 200W (12V–28V, XT60), with 2.2 hrs listed at that maximum.

The C1000 Gen 2 carries a Guinness-certified claim for the fastest 1kWh recharge: 49 min to full. That speed needs UltraFast mode (1,600W AC), which you enable in the app. Standard AC charging is 1,200W max. Solar input goes up to 600W (11-28V 8.2A / 29-60V 14.5A, XT60i), which is three times the Elite's ceiling on paper.

For a buyer pairing the station with panels for camping or outage prep, the C1000 Gen 2 is the clear choice. For a small unit that tops up over a coffee break, the Elite 30 V2 does that well.

Edge: C1000 Gen 2 for solar and for refilling a large battery fast. Elite 30 V2 if you just want a quick top-up of a small one.

Ports, UPS and controls

The Elite 30 V2's US page lists 9 output ports, though some sources count 8. They are 2 AC, USB-C at 140W and 100W, 2 USB-A at 15W, a 12V/10A car port and 2 DC5521 12V. The 140W USB-C port can charge a laptop quickly, which reviewers single out. The built-in UPS has a ≤10ms switchover and supports pass-through charging, with up to 980W AC bypass. The maker lists no touchscreen, and control is through the app over Bluetooth and WiFi, with custom charging modes.

The C1000 Gen 2 lists 10 ports: 5 AC, 2 x USB-C 140W, 1 x USB-C 15W, 1 x USB-A 12W and a 12V car port at 120W. It has a 10 ms UPS switchover for backup, an LCD screen and app control. Anker's facts don't mention pass-through charging either way, so check that if it matters to you.

For a desk UPS, both qualify. If you want two 140W USB-C ports and five AC outlets in one place, the Anker offers more. If you want a documented AC bypass rating for a desk setup, BLUETTI is the one that spells it out.

Edge: a split. C1000 Gen 2 for outlet count and a screen; Elite 30 V2 for a documented pass-through setup.

Battery life span

BLUETTI rates the Elite 30 V2 at 3,000+ cycles. Anker rates the C1000 Gen 2 at 4,000+ cycles (to 80%). Both are LiFePO4 and both carry a 5 years warranty, so long-term durability is strong on each. Anker's rating is 4,000+ cycles (to 80%) and BLUETTI's is 3,000+ cycles, but the end point is only stated for Anker, so the two may not be directly comparable.

If you want more on how another pair of power stations compares, our Bluetti Elite 200 V2 vs Jackery Explorer 1000 v2 comparison covers a similar capacity-versus-portability decision.

What experts say

Reviewers like both units, and the scores are close. For the Elite 30 V2, TechRadar gave 4.5/5 and MacRumors gave 4.5/5, an expert average of 9 out of 10. Reviewers praise its light weight, its 600W output with 1500W lifting, its 140W USB-C port, its UPS with pass-through charging and its quiet running. Common criticisms are the small 288Wh capacity, the lack of expansion, high idle drain with AC on unless Eco mode is used, and no built-in light or wireless charging pad.

The C1000 Gen 2 scored 4.5/5 from MacRumors, 9/10 from Android Authority and 8/10 from How-To Geek, for an expert average of 8.7 out of 10. It is also recommended in 1 expert buying guide. Reviewers praise its 1,024Wh capacity, 2,000W continuous output with 3,000W surge, the 49-minute recharge with UltraFast mode, its dual 140W USB-C ports with five AC outlets, and its solar input and cycle life. The criticisms are loud fans when charging fast or under heavy load, no expansion, no built-in light, and the weight.

The gap in averages is small, and the two units serve different needs. Read the scores as a sign that each does its own job well.

Choose the BLUETTI Elite 30 V2 if…

You want a small, light, quiet power station for laptops, phones and a desk UPS, and your loads stay modest. At 4.3kg, with about 30dB running and a 140W USB-C port, it is easy to carry, store and live with. You accept that 288Wh will not run anything heavy for long, and you are fine with no expansion.

Choose the Anker SOLIX C1000 Gen 2 if…

You need real home backup or camping power for appliances and tools. The 1,024Wh capacity, 2,000W continuous output, up to 600W solar input and 49-minute UltraFast recharge justify the extra weight. You should be prepared for loud fans when it charges fast or works hard.

The verdict

For most people who want a portable, quiet backup for small electronics, the BLUETTI Elite 30 V2 is the easier pick and has the slightly higher expert average. Anyone who wants to run appliances or tools at home or at camp should skip it and buy the Anker SOLIX C1000 Gen 2, which gives you far more capacity, output and solar input for the same mid-range tier.

Related buying guides

• BLUETTI Elite 200 V2 Review (2026): Big Power, Heavy Body
• Anker SOLIX F3800 Plus Review (2026): Home Backup Core
• Jackery Explorer 1000 v2 Review (2026): Light, Quiet Power
• Galaxy S26 Ultra vs Pixel 10a (2026): Flagship or Value Pick?
• Anker SOLIX C300 Review (2026): Compact, Quiet, Limited
• Best Power Station for CPAP 2026: Runtime, Weight & Backup
• Best Home Backup Batteries for Power Outages 2026: Any Size